Payment & Shipping Terms:
|Usage:||Indoor||Tube Chip Color:||Full Color|
|Pixel Density:||62,500 Dot / Sqm||Driving Method:||1 / 16 Scan|
|Screen Dimension:||Customerized||Optimum Viewing Angle:||160° / 120°|
|Average Power Consumption(w/m2):||440||Working Life:||>100000 Hours|
|Display Function:||Video||ED Standard:||2121 SMD, 3 In 1|
Video 256*256mm rgb led module SMD3528 / led screen modules customerized
Famous brands raw material selection
1. LED: well-known international brand, with wide viewing angle, high brightness, little attenuation, good heat dissipation, and vivid colors.
2. Driving IC: famous brands such as Netherland Philips, Japanese Toshiba, avoidable the defective phenomena, such as dark bright, virtual light and so on.
3. Power supply: industrial-strength brand. The power t maximum power reserve of 20% the space, the range of voltage fluctuation is less 5%, high stability.
4. Connector: aerial grade brands ensure the stable transmission of power and signal.
5. PCB Board: FR-4 A2 CCL, adopt 4-layer design.
1. Highcontrast mask design: new antiglare mask design, fine sand processing and black coating on the surface, no glare, and improve the contrast.
2. Automatic SMT: adopting highend automatic SMT machine, advanced wave soldering and reflow soldering processing, to effectively avoid the wrong plug, plug leakage, leakage welding, virtual welding problems.
3. Module suite: improve the planeness of the whole screen, and reduce the seam between the neighboring modules.
4. Multi gray display: adopting 16bit gray processing technology to restore the natural image. And using S-PWM driving technology to add gray grade, meet the 16bits high gray display requirements with low brightness.
5. Point by point correction: the correction technology of brightness and chromaticity to ensure the uniformity of led screen’s brightness and color.
Variety and easiness
1. Various installation: cabinet assembly or magnetic suction installation
2. Easy maintenance: optional front maintenance, back maintenance and single point maintenance according to the installation site.
3. High contrast mask design
|Pixel||Physical pixel pitch: 4 mm|
|Pixel configuration: 1R1PG1PB|
|Module||Module resolution:64 x 64 pixels||Module size: 256 x 256 mm|
|Cabinet||Cabinet resolution:128x128 pixel||Cabinet size: 512x512x80mm|
|Cabinet density:16384 pixels||Module Qty: 4pcs = 2(w) x 2(h)|
|Material: die casting aluminum||Weight: 7.8Kg|
|Average power : 110W||Max power consumption: 220W|
|Brightness: 1100 - 1500 nits|
|Brightness adjusted: 100 grade by software, or by Auto-optic induced|
|Color processing: 16bit|
|Display color: 280 trillion|
|Color temperature(k): 5000 — 9500 (choice by user)|
|Physical density: 62500 pixels/sqm|
|Whole display flatness: ≤ 1mm juncture|
|Best view distance: ≥ 3m|
|Best view angle: Horizontal ±80°, Vertical ±80°|
Storage temperature: -35℃ ~ +85℃
Working temperature: -20℃ ~ +50℃
|Driving method: Constant driving current|
|Refresh frequency: ≥ 1300Hz|
|Frame rate: ≥ 60Hz|
|Humidity(RH): ≤ 90 ~ 95%|
|Protection grade: IP64|
|Working Voltage: DC 5V|
|Power supply: AC110 / 220V, 50/60Hz|
|Average power consumption: 390 w/sqm|
|Max power consumption: 800 w/sqm|
|MTBF: 10000 hours|
|Screen lifetime: 100000 hours|
|Signal interface: DVI|
|Communication distance: Internet cable: ≤ 120m Fiber cable: 1000m|
|Signal transfer mode: Pixels to pixels display synchronized|